Product Description
Lennox ML196E 30000 BTU 96% Fuel-Efficient Gas Furnace
Single-Stage, 96% Fuel-Efficient Gas Furnace with Power Saver™ Constant-Torque Motor Design
The Power Saver™ constant torque motor in the Lennox ML196E 30000 BTU uses less energy in both heating and cooling modes, helping you save on utility bills. Flexible airflow based on a home’s ductwork makes this furnace 33% more efficient than older furnaces, while also delivering high gas efficiency with the 96% AFUE.
- Low NOX – Approved by the California Energy Commission and meets California Nitrogen Oxides Standard (NOx) limits of 40 ng/J
- Energy-Efficient Design – With an energy rating of 96% AFUE, you pay for perfectly heated air, not wasted energy. Lennox ML196E 30000 BTU
- Dual-fuel operation – When the ML196E is paired with a Lennox® heat pump, it creates a system that automatically switches between electricity and gas, keeping you warm and energy efficient.
- Duralok Plus™ heat exchanger, built for Lennox’ high-efficiency (90%) condensing gas furnaces, that’s made of high-quality, patented ArmorTuf™ steel to ensure high reliability and efficiency.
HEATING SYSTEM
Lennox Duralok Plus™ Heat Exchanger Assembly
• Lennox developed heat exchanger assembly consists of primary heat exchanger and secondary condenser coil assembly
• Main multi-pass crimped seam design clamshell type
• Constructed of heavy-gauge, aluminized steel
• Designed for normal expansion and contraction with maximum efficiency and minimum resistance to air flow
• Secondary heat exchanger condenser coil constructed of aluminum fins fitted to stainless steel tubes
• Coil is factory tested for leaks
• Condensate drain header box assembly located on front of coil
• Compact size permits low overall design of furnace cabinet
• Laboratory life cycle tested in excess of industry standards
Lennox Designed Header Box
• Header box on end of condenser coil collects flue condensate for disposal through condensate drains
• Drains are located on each side of the cabinet for easy field installation of condensate drain trap
• Only one drain is used, the other drain is sealed
• Condensate drain trap is included with the unit for field installation
Submit an online request or call us now to get a 2 minute quote over the phone.
(647) 847-2998
LIMITED WARRANTY PERIOD:
For Equipment installed and used in a Residential Application,
this Basic Limited Warranty begins on the date the Equipment
is originally installed and ends as set forth below (the “Warranty
Period”). If the date of original installation cannot be verified,
the Warranty Period begins six (6) months after the date of
manufacture. Notwithstanding the above, when Equipment is
installed in a newly constructed home, the Warranty Period begins
on the closing date of purchase from the builder. Proof of closing
may be required.
FIVE-YEAR LIMITED WARRANTY
(Residential Applications)
Covered Components (except for heat exchangers and
compressors which are covered as outlined separately) are
covered by this Basic Limited Warranty for a period of five (5)
years from installation (existing homes) or closing date (new
construction) when installed in a Residential Application.
ONE-YEAR LIMITED WARRANTY
(Non-Residential Applications)
Covered components (except for heat exchangers and
compressors which are covered as outlined separately) are
warranted by Lennox for a period of one (1) year when installed
in a Non-Residential Application.
LIMITED WARRANTY PERIOD
(for heat exchangers and compressors)
Notwithstanding the above, heat exchangers and compressors
within the following Equipment are warranted by Lennox for the
following periods:
Equipment Model
Number
Warranty Period for Heat
Exchanger Only
ML180, ML180E,
ML180V, ML193,
ML193E, ML195,
ML196E, ML296V
Twenty (20) years --
Residential Applications; Ten
(10) years -- Non-Residential
Applications
LF24, LF25, LS25, TUA
with Aluminized Heat
Exchanger
Ten (10) years -- All
applications
LF24, LS25, TUA with
Stainless Steel Heat
Exchanger
Fifteen (15) years -- All
applications
Equipment Model
Number
Warranty Period for
Compressor Only
13ACX, 14ACX, 16ACX,
ML14XC1, ML17XC1,
ML18XC2, 13HPX,
14HPX, 16HPX,
ML14XP1, ML16XP1,
ML17XP1
Five (5) years -- All
Applications
EXTENDED WARRANTY PERIOD FOR EVAPORATOR COILS
INSTALLED WITH DAVE LENNOX SIGNATURE COLLECTION EQUIPMENT
When installed in Dave Lennox Signature® Collection Equipment,
the evaporator coils and electric heat sections listed below are
warranted by Lennox for the following extended periods:
Equipment Model
Number
Warranty Period for Evaporator
Coil Only
CR33
Ten (10) years -- When matched
with Dave Lennox Signature®
Collection air conditioners or heat
pumps
WARRANTY COVERAGE
Subject to the terms and conditions herein, if, during the Warranty
Period, a Covered Component in the Equipment fails solely because
of a manufacturing defect, Lennox will provide a replacement
component to the Owner through a Lennox dealer or other licensed
HVAC contractor. The Owner will be responsible for all shipping,
freight, and handling charges, as well as all fees and costs arising
out of or relating to the warranty service, including, but not limited to,
all trip charges, labor costs, and other costs involved in diagnostic
calls or in removing, repairing, servicing, or replacing any component.
For a period of 90 days after a warranty claim is filed under this
Basic Limited Warranty, the Owner is responsible for surrendering
the failed component(s) to Lennox upon request. Lennox’ sole
responsibility under this Basic Limited Warranty is to provide a
replacement component as set forth above. In the event that any
Covered Component is no longer available, Lennox will, at its option,
provide a substitute component or allow the Owner to purchase
equivalent Lennox equipment at a reduced price off the Lennox list
price in effect on the date of the failure. Replacement equipment
must be purchased through and installed by an independent Lennox
dealer listed at www.lennox.com.
Both Lennox and the Owner of the Equipment are bound by this
Basic Limited Warranty.
MAKING A WARRANTY CLAIM
To make a warranty claim, the Owner must contact an independent
Lennox dealer or a licensed HVAC contractor. An independent
Lennox dealer may be located by accessing www.lennox.com,
e-mailing Lennox at www.lennox.com/help/contact-us/warranty
(click on “E-mail our Contact Center”), or by calling Lennox at
1-800-9-Lennox. You must contact the Lennox dealer or HVAC
contractor pursuant to this paragraph prior to the Warranty
Period’s expiration in order for the claim to be eligible for
coverage. All warranty claims must be submitted within
forty-five (45) days of the applicable product failure date.
The failure to submit a claim within such forty-five (45) day
period will result in the denial of a claim. Lennox has no
liability whatsoever in the event that the Owner’s dealer or
HVAC contractor fails to timely and/or properly file a claim
hereunder.
When warranty coverage is requested, the Owner must provide,
and the Lennox dealer or HVAC contractor must collect, the
following:
1 - The Equipment model and serial number;
2 - The Owner’s name and location of the Equipment;
3 - The date of original Equipment installation (existing homes)
or closing date (new construction);
4 - An accurate description of the problem.