Product Description

Lennox ML196E 44000 BTU 96% Fuel-Efficient Gas Furnace

Single-Stage, 96% Fuel-Efficient Gas Furnace with Power Saver™ Constant-Torque Motor Design

The Power Saver™ constant torque motor in the Lennox ML196E 44000 BTU uses less energy in both heating and cooling modes, helping you save on utility bills. Flexible airflow based on a home’s ductwork makes this furnace 33% more efficient than older furnaces, while also delivering high gas efficiency with the 96% AFUE.

• Low NOX – Approved by the California Energy Commission and meets California Nitrogen Oxides Standard (NOx) limits of 40 ng/J
• Energy-Efficient Design – With an energy rating of 96% AFUE, you pay for perfectly heated air, not wasted energy. Lennox ML196E 44000 BTU
• Dual-fuel operation – When the ML196E is paired with a Lennox® heat pump, it creates a system that automatically switches between electricity and gas, keeping you warm and energy efficient.
• Duralok Plus™ heat exchanger, built for Lennox’ high-efficiency (90%) condensing gas furnaces, that’s made of high-quality, patented ArmorTuf™ steel to ensure high reliability and efficiency.

HEATING SYSTEM

Lennox Duralok Plus™ Heat Exchanger Assembly
• Lennox developed heat exchanger assembly consists of primary heat exchanger and secondary condenser coil assembly
• Main multi-pass crimped seam design clamshell type
• Constructed of heavy-gauge, aluminized steel
• Designed for normal expansion and contraction with maximum efficiency and minimum resistance to air flow

• Secondary heat exchanger condenser coil constructed of aluminum fins fitted to stainless steel tubes
• Coil is factory tested for leaks
• Condensate drain header box assembly located on front of coil
• Compact size permits low overall design of furnace cabinet
• Laboratory life cycle tested in excess of industry standards

Lennox Designed Header Box
• Header box on end of condenser coil collects flue condensate for disposal through condensate drains
• Drains are located on each side of the cabinet for easy field installation of condensate drain trap
• Only one drain is used, the other drain is sealed
• Condensate drain trap is included with the unit for field installation

 

Submit an online request or call us now to get a 2 minute quote over the phone.

(647) 847-2998

Brand	Lennox
Furnace Efficiency	96% AFUE
Gas Stages	1 Stage
Heating Capacity	30K-40K BTU Gas Furnaces

Key features

• Price includes standard* installation
• 96% Fuel-Efficient Gas Furnace with Power Saver™ Constant-Torque Motor Design
• Merit ML196E Series
• Single-Stage, 96% AFUE
• Energy efficiency (AFUE) - 96%
• Dual-fuel operation
• Duralok Plus™ heat exchanger, built for Lennox’ high-efficiency
• Input capacities - 44000 BTU

LIMITED WARRANTY PERIOD: For Equipment installed and used in a Residential Application, this Basic Limited Warranty begins on the date the Equipment is originally installed and ends as set forth below (the “Warranty Period”). If the date of original installation cannot be verified, the Warranty Period begins six (6) months after the date of manufacture. Notwithstanding the above, when Equipment is installed in a newly constructed home, the Warranty Period begins on the closing date of purchase from the builder. Proof of closing may be required. FIVE-YEAR LIMITED WARRANTY (Residential Applications) Covered Components (except for heat exchangers and compressors which are covered as outlined separately) are covered by this Basic Limited Warranty for a period of five (5) years from installation (existing homes) or closing date (new construction) when installed in a Residential Application. ONE-YEAR LIMITED WARRANTY (Non-Residential Applications) Covered components (except for heat exchangers and compressors which are covered as outlined separately) are warranted by Lennox for a period of one (1) year when installed in a Non-Residential Application. LIMITED WARRANTY PERIOD (for heat exchangers and compressors) Notwithstanding the above, heat exchangers and compressors within the following Equipment are warranted by Lennox for the following periods: Equipment Model Number Warranty Period for Heat Exchanger Only ML180, ML180E, ML180V, ML193, ML193E, ML195, ML196E, ML296V Twenty (20) years -- Residential Applications; Ten (10) years -- Non-Residential Applications LF24, LF25, LS25, TUA with Aluminized Heat Exchanger Ten (10) years -- All applications LF24, LS25, TUA with Stainless Steel Heat Exchanger Fifteen (15) years -- All applications Equipment Model Number Warranty Period for Compressor Only 13ACX, 14ACX, 16ACX, ML14XC1, ML17XC1, ML18XC2, 13HPX, 14HPX, 16HPX, ML14XP1, ML16XP1, ML17XP1 Five (5) years -- All Applications EXTENDED WARRANTY PERIOD FOR EVAPORATOR COILS INSTALLED WITH DAVE LENNOX SIGNATURE COLLECTION EQUIPMENT When installed in Dave Lennox Signature® Collection Equipment, the evaporator coils and electric heat sections listed below are warranted by Lennox for the following extended periods: Equipment Model Number Warranty Period for Evaporator Coil Only CR33 Ten (10) years -- When matched with Dave Lennox Signature® Collection air conditioners or heat pumps WARRANTY COVERAGE Subject to the terms and conditions herein, if, during the Warranty Period, a Covered Component in the Equipment fails solely because of a manufacturing defect, Lennox will provide a replacement component to the Owner through a Lennox dealer or other licensed HVAC contractor. The Owner will be responsible for all shipping, freight, and handling charges, as well as all fees and costs arising out of or relating to the warranty service, including, but not limited to, all trip charges, labor costs, and other costs involved in diagnostic calls or in removing, repairing, servicing, or replacing any component. For a period of 90 days after a warranty claim is filed under this Basic Limited Warranty, the Owner is responsible for surrendering the failed component(s) to Lennox upon request. Lennox’ sole responsibility under this Basic Limited Warranty is to provide a replacement component as set forth above. In the event that any Covered Component is no longer available, Lennox will, at its option, provide a substitute component or allow the Owner to purchase equivalent Lennox equipment at a reduced price off the Lennox list price in effect on the date of the failure. Replacement equipment must be purchased through and installed by an independent Lennox dealer listed at www.lennox.com. Both Lennox and the Owner of the Equipment are bound by this Basic Limited Warranty. MAKING A WARRANTY CLAIM To make a warranty claim, the Owner must contact an independent Lennox dealer or a licensed HVAC contractor. An independent Lennox dealer may be located by accessing www.lennox.com, e-mailing Lennox at www.lennox.com/help/contact-us/warranty (click on “E-mail our Contact Center”), or by calling Lennox at 1-800-9-Lennox. You must contact the Lennox dealer or HVAC contractor pursuant to this paragraph prior to the Warranty Period’s expiration in order for the claim to be eligible for coverage. All warranty claims must be submitted within forty-five (45) days of the applicable product failure date. The failure to submit a claim within such forty-five (45) day period will result in the denial of a claim. Lennox has no liability whatsoever in the event that the Owner’s dealer or HVAC contractor fails to timely and/or properly file a claim hereunder. When warranty coverage is requested, the Owner must provide, and the Lennox dealer or HVAC contractor must collect, the following: 1 - The Equipment model and serial number; 2 - The Owner’s name and location of the Equipment; 3 - The date of original Equipment installation (existing homes) or closing date (new construction); 4 - An accurate description of the problem.